Stainless Steel 90 Degree Elbow

A stainless steel 90 degree elbow is a critical plumbing and piping component designed to connect two separate pipes or tubes at a perpendicular angle,altering the direction of fluid,gas,or steam flow by exactly 90 degrees. Constructed from high-grade corrosion-resistant alloys,it is commonly utilized across severe industrial, marine, chemical,and food-processing environments.

Stainless Steel 90 degree Elbow

1) Size: 1/2" - 48" (DN15 - DAN1200)

2) THK: SCH5S - SCH160 XXS
3) Material; Duplex2205/S31803, 904L, 317L, 347H, 316Ti, 321, 304

Features:
1) Type: butt welded and seamless pipe fitting

2) Size: DN15 - DN1200 (1/2" - 48").

we can also produce other specifications according to customers' requirements .

3) Wall thickness: SCH5S - SCH160S.

4) Standard: ASME/ANSI B16.9, GB/T12459, GB/T13401, SH3408, SH3409, HG/T21635,

HG/T21631, MSS SP - 43, DIN 2605, JIS B2313.

5) Material: Stainless steel (304, 304L, 316, 316L, 317L, 321, 321H, 310S, 347H, S31803, 904L, )

6) Applications range: For use in the petroleum, smelting, foodstuff, power, papermaking,
chemical, medical equipment, aviation, boiler heat exchanger, and other fields.

Connection Methods For A Stainless Steel 90 Degree Elbow

Butt-Weld (BW):
The ends are chamfered so they can be welded directly to pipes.This creates a seamless,leak-proof,continuous metal structure designed for highly critical, high-pressure,or high-temperature pipelines.

Threaded (NPT or BSP):
Features internal female or external male threads.Commonly used in lower-pressure utility lines or plumbing setups where parts must be easily taken apart for maintenance.

Socket Weld (SW):
The pipe slips directly into a recessed area of the fitting before being sealed with a fillet weld.This design is optimized for smaller pipe diameters managing high structural loads.

Hot Tags: stainless steel 90 degree elbow, China stainless steel 90 degree elbow manufacturers, suppliers, factory, Stainless Steel 90 Degree Elbow